Chiron MILL 6000 machining centre
≈ $133,300
Weißenfels6880 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+34 932 69 ...
Show
+34 932 69 62 82
+34 617 18 ...
Show
+34 617 18 90 68
Germany 
Germany, Location:würzburg
Germany, Karlsbad
Germany, Karlsbad
Germany, Weißenfels
Germany, Weißenfels
Germany, Pullach
Germany, Weißenfels
Germany, Weißenfels
Germany, Alemania
Germany, Karlsbad
Germany, Weißenfels
Germany, Location:hamburg
Germany, Pullach
Germany, Location:erfurt
Germany, Peiting
Germany, Bünde
Germany, Dormagen
Chiron
Model
MILL 6000
Year
2004 - 2013
Remarks
Vertical CNC machining center - 5 axis
Operating hours: 77,374 h
Technical Specifications:
Siemens 840D (PCU50, NCU572.4)
NC Swivel Head
High-Speed Package:
Motor husillo D: 12.000 rpm, 140 Nm
- X Travel: 6,000 mm / Y: 630 mm
Fast displacement in X/Y/Z: 60 m/min.
Chip-to-chip time: 3.0 seconds (3.3 seconds DIN) vertically and 4.7 seconds vertically. (5.0 s DIN) horizontal
Production Package:
Scraper belt conveyor, discharge height 1050 mm
Internal coolant preparation
KNOLL VRF250 Rotary Vacuum Filter (Steel, Cast Iron, Aluminum, Plastic, Brass)
High pressure 70 bar with high pressure pump and variable valve
Pendulum section washing gun
Emulsion mist extraction, 2 x 800 m²/h extraction fans each
Left and right swivel sight glasses (1400 mm from the centre of the machine)
Automatic loading doors
Central separator for pendulum machining
92 HSK-A63 tool positions (bottom magazine)
Additional equipment:
5-axis milling package
Air blowing
Tool Life Monitoring
Additional RS232 V24 in the control cabinet
BDE/MDE interface (statuses: machine on, machine running, parts counter)
Marposs (Brankamp) CMS100 collision monitoring system
3D machine model for kinematic simulation in the CAM programming system
210 bar hydraulic power unit, 2 clamping circuits, independent system clamping pressure for each pendulum field,
Clamping pressure control
KOHN linear clamping system
8 x KOHN Multi 2000 MFS 125/680 HD hydraulic jaws
Two-piece operator pitch over the entire working width of 6000 mm
Note on the design of the machine:
Machining of long workpieces up to a maximum of 6000 mm
Machining of the front face (5th side) horizontally with rotating head (right/left)
Pendulum machining by means of a central partition, max. Part length: 1773 mm with SK machining at both ends (tool length: 120 mm).
4 double hydraulic jaws (fixed center jaw) per pendulum section. Positioning and clamping by means of a linear system (hydraulic unlocking, mechanical clamping).
The machine is equipped with a pneumatically extendable workpiece stop on each side of the pendulum, as well as two separately controllable pneumatic lifters. These lifters allow long parts to be placed in an inclined position after machining (to drain water from the profiles) in a first step and removed from the jaws in a second step for ergonomic handling.
Note on machine status:
The machine was completely overhauled by manufacturer Chiron in 2013.
The last spindle change was carried out in March 2021 (spindle hours approx. 7300 h).
The machine has received annual maintenance, repairs and overhauls by the manufacturer, in accordance with the latest technical standards (preventive maintenance). The last review was carried out in January 2024.
There are currently no known defects in the machine.
The machining process with the KOHN linear clamping system can be visualized on the new machine of identical construction (manufactured in 2023).
Chiron
Modelo
MILL 6000
Año
2004 - 2013
Observaciones
Centro de mecanizado CNC vertical - 5 ejes
Horas de funcionamiento: 77.374 h
Especificaciones técnicas:
Siemens 840D (PCU50, NCU572.4)
Cabezal giratorio NC
Paquete de alta velocidad:
Motor husillo D: 12.000 rpm, 140 Nm
Recorridos X: 6.000 mm / Y: 630 mm
Desplazamiento rápido en X/Y/Z: 60 m/min.
Tiempo de viruta a viruta: 3,0 segundos (3,3 segundos DIN) verticalmente y 4,7 segundos verticalmente. (5,0 s DIN) horizontal
Paquete de producción:
Transportador de banda rascadora, altura de descarga 1050 mm
Preparación interna de refrigerante
Filtro de vacío rotativo KNOLL VRF250 (acero, fundición, aluminio, plástico, latón)
Alta presión 70 bar con bomba de alta presión y válvula variable
Pistola de lavado por sección de péndulo
Extracción de neblina de emulsión, 2 ventiladores de extracción de 800 m²/h cada uno
Mirillas giratorias a izquierda y derecha (a 1400 mm del centro de la máquina)
Puertas de carga automáticas
Separador central para mecanizado pendular
92 posiciones de herramientas HSK-A63 (almacén de fondo)
Equipamiento adicional:
Paquete de fresado de 5 ejes
Soplado de aire
Monitorización de la vida útil de la herramienta
V24 RS232 adicional en el armario de control
Interfaz BDE/MDE (estados: máquina encendida, máquina en marcha, contador de piezas)
Sistema de monitorización de colisiones Marposs (Brankamp) CMS100
Modelo de máquina 3D para simulación cinemática en el sistema de programación CAM
Unidad de potencia hidráulica de 210 bar, 2 circuitos de sujeción, presión de sujeción del sistema independiente para cada campo de péndulo,
control de la presión de sujeción
Sistema de sujeción lineal KOHN
8 mordazas hidráulicas KOHN Multi 2000 MFS 125/680 HD
Paso de operador de dos piezas en todo el ancho de trabajo de 6000 mm
Nota sobre el diseño de la máquina:
Mecanizado de piezas largas de hasta un máximo de 6000 mm
Mecanizado de la cara frontal (5.º lado) horizontalmente con cabezal giratorio (derecha/izquierda)
Mecanizado pendular mediante tabique central, máx. Longitud de la pieza: 1773 mm con mecanizado SK en ambos extremos (longitud de la herramienta: 120 mm).
4 mordazas hidráulicas dobles (mordaza central fija) por sección de péndulo. Posicionamiento y sujeción mediante un sistema lineal (desbloqueo hidráulico, sujeción mecánica).
La máquina está equipada con un tope de pieza extensible neumáticamente en cada lado del péndulo, así como dos elevadores neumáticos controlables por separado. Estos elevadores permiten colocar las piezas largas en posición inclinada después del mecanizado (para drenar el agua de los perfiles) en un primer paso y retirarlas de las mordazas en un segundo paso para un manejo ergonómico.
Nota sobre el estado de la máquina:
La máquina fue revisada completamente por el fabricante Chiron en 2013.
El último cambio de husillo se realizó en marzo de 2021 (horas de husillo aprox. 7300 h).
La máquina ha recibido mantenimiento, reparaciones y revisiones anuales por parte del fabricante, de acuerdo con los últimos estándares técnicos (mantenimiento preventivo). La última revisión se realizó en enero de 2024.
Actualmente no se conocen defectos en la máquina.
El proceso de mecanizado con el sistema de sujeción lineal KOHN puede visualizarse en la máquina nueva de construcción idéntica (fabricada en 2023).