Deckel Maho DMC 160 duoBLOCK machining centre
Heidelberg
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Location:stuttgart
Germany, Location:stuttgart
Germany, Pullach
Germany, Pullach
Germany, Location:munich
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Hamburg
Germany, Location:dortmund
Germany, Pullach
Germany, Location:stuttgart
Germany, Location:berlin
Germany, Location:frankfurt
Germany, Pullach
Germany, Pullach
Germany, Location:essen
Manufacturer
Deckel Maho
Model
DMC 160 duoBLOCK
Year of Manufacture
2017
Machine type
Horizontal Machining Center
3+2 Axes
Control
Heidenhain (measuring system
photoelectric
absolute)
TECHNICAL SPECIFICATIONS
Travel Y: 1400 mm
Travel Z: 1100 mm
Travel A/B/C: C: 360 degrees
B: 210 degrees
Table Dimensions: 1400 mm diameter
Max. Table Load: 3500 kg (with pallet)
T-Slots/Pallet Size: Pallet system: ISO 9114 Standard
Slot size/quantity: Pass/threaded bushings M16 diameter 16
531 pieces
Spindle Type/Mount: Motor spindle SK50
without gearbox
Speed Range: 0-12000 rpm (operation 1)
0-5000 (others)
Spindle Power: See datasheet
Spindle Torque: See datasheet diagram
Rapid Traverse X: 60 m/min
Rapid Traverse Y/Z: 60 m/min
Max. Feed Rate: 60000 mm/min (programmable stepless)
Positioning Accuracy: 1 µm
Repeatability: 5 µm
Tool Magazine: 240 places (vertical chain magazine HSK100/SK50)
Max. Tool Length: 650 mm
Max. Tool Weight: 30 kg
Tool Mount: SK50 DIN 69871 Form AD/A/B with internal coolant supply
Internal Coolant Through Spindle: Yes
Compressed Air Requirement: min. 5 max. 8 bar
External Cooling: Yes - coolant system 980L
Chip Conveyor: Yes
Machine Dimensions (LxWxH): 9170 x 7381 x 3969 mm
Power Connection: 93 kVA
3-phase
400V ±10%
50Hz
160A max
SPECIAL EQUIPMENT
4th Axis: Yes - B-axis (210 degrees)
5th Axis: Yes - C-axis (360 degrees)
Rotary Table/Additional Axis: duoBLOCK technology with 5-axis capability
Tailstock: No
Bar Feeder: No
Tool Measurement: No
Probe: Yes
High-Pressure Cooling: No
Enclosure: Yes
Extraction: Yes - band filter system 980L
Oil Mist Separator: Yes (optional according to datasheet)
DNC Connection: Yes
CAM Post-Processor Available: Yes
CONDITION
Total Operating Hours: 24446.29 h
Spindle Hours: 12004.82 h
Shift Operation: 2 shifts
Usage Profile: Single pieces to small series
Predominantly Machined Materials: Gray cast iron
Regular Maintenance Performed: Until 2021 by DMG
thereafter by machine operator
Maintenance Interval: Weekly/monthly/semi-annual/annual
Last Maintenance: 2025-10-06
Maintenance By: Machine operator
Known Repairs/Overhauls: Motor spindle replacement 26.11.2021
Spindle Replacement: Yes
Other Major Repairs: No
Current Condition: In operation until 20.11.2025
Under Power and Ready for Demonstration: Yes
Known Defects/Problems: No
Find more here
show contacts
Contact us at
show contacts