Samag MFZ 2-2 machining centre
Frankfurt
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
+49 89 38031644
Germany, Location:frankfurt
Germany, Frankfurt
Germany, Frankfurt
Germany, Location:munich
Germany, Location:essen
Germany, Location:stuttgart
Germany, Location:düsseldorf
Germany, Gräfelfing
Manufacturer
Samag
Model
MFZ 2-2
Units Available
3
Years of Manufacture
2006
2007
and 2003
Technical Specifications
Total weight: 24,000 kg (per nameplate)
general weight 22,000 kg
comprising base machine 20,000 kg
empty clean water tank 930 kg
and empty chip conveyor 450 kg
Dimensions with coolant tank and chip conveyor: 5.50 x 6.00 x 3 m
Dimensions during maintenance: 6.00 x 6.50 x 3 m
Connection power: 72 kVA / 72 kW
Mains voltage: 3 x 400 V AC
plus or minus 10 percent
Frequency: 50 Hz
Control voltage: 230 V AC / 24 V DC
Fuse protection ahead of main switch: 3 x 160 A
Numerical control: manufacturer Indromat type MTC200
Operating panel: main control panel consisting of flat control panel BTV 20.3
machine control panel BTM 16.2
and CNC full keyboard VAK 40.1
with workpiece loading station at the right operating panel
Pneumatic operating pressure: 6 bar
air demand approximately 200 cubic metres per hour
Hydraulic pressure: 220 bar
volume flow at least 12 litres per minute
oil quantity 100 litres
Main Spindle Drive
Spindle unit: GMN high-frequency spindle HCS 220-16000/28
Number of spindles: 2
spindle spacing 450 mm
Speed range: 4,200 to 16,000 rpm
Power (S1
100 percent duty cycle): 28 kW
Torque (S1): 65 Nm
Torque (S2): 74 Nm
Tool clamping system: OTT system with hydraulic release unit
Tool holder: HSK A63 per DIN 69893-1
mount diameter 63 mm
Axis Data
X-axis travel (horizontal): 450 mm
Y-axis travel (vertical): working stroke 500 mm
total stroke including tool change 775 mm
Z-axis travel (horizontal): 450 mm
Feed rate: 1 to 10,000 mm per minute
Rapid traverse rate: 60,000 mm per minute
Feed force: 8,000 N per axis
Repeatability: 0.002 mm
Workpiece Carrier Unit
Swivel unit W-axis: swivel range 0 to 180 degrees
indexing accuracy plus or minus 3 arc
seconds
swivel time 180 degrees in 4.5 seconds
Workpiece holder A1/A2-axis: swivel time 180 degrees in 3.5 seconds
Workpiece clamping space
including clamping beam: 2 x 700 x 1,100 mm
Tool Storage
Automatic pick-up tool magazine
disc magazine type
decagon layout
Number of storage places: 100 (2 x 50)
arranged in 10 cassettes of 10 places each
Maximum tool loading mass: 280 kg (35 kg per cassette)
Maximum tool weight with plastic gripper: 6 kg
with steel gripper: 8 kg
Maximum tool length: 320 mm
Maximum tool diameter: 80 mm (160 mm with free neighbouring places)
Average tool change time at the spindle
tip to tip
without disc rotation: 4.5 seconds
Equipment
chip conveyor
documentation/manual
rotational speed infinitely variable
Find more here
show contacts
Contact us at
show contacts