New Kaleta 6 S plastering machine
≈ KES 791,000
Aleksandrowice7497 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 660 56...
Show
+48 660 562 900
Poland 
Poland, Aleksandrowice
Poland, Aleksandrowice
Poland, Aleksandrowice
Poland, Aleksandrowice
Poland, Aleksandrowice
Poland, Aleksandrowice
Poland, Aleksandrowice
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Belchatów
Poland, Węgrzce
Poland, Przemęczanki
Poland, Radziemice
Poland, Radziemice
Poland, Radziemice
Poland, Przemęczanki
Poland, Radziemice
Poland, Przemęczanki
Plastering unit for machine-made plaster (lime-cement, lime-gypsum, special and self-leveling floors).
EQUIPMENT
Spray gun 1 pc
Mortar hose 1×10 m
Air hose 1×10 m
Worm pump D6-3 FIT 1 pc
Mixer 1 pc
Cleaner with connector 1 pc
Wrench form worm 1 pc
Gun nozzle 3 pcs
Open ended spanner 1 pc
Gun cleaner 1 pc
Cleaning ball 1 pc
Couple r2 pcs
OMM1 pc
Technical characteristics
Length - 960 mm
Width - 670 mm
Height - 1580 mm
Charge height - 960 mm
Weight - 250 kg
Basket capacity - 100 kg
*output - 25 l/min
Max.forcing pressure - 30 atm
*supply distanceup to - 20 m
Pump motor - 4 kW / 230 V
Basket motor - 1,1 kW / 230 V
Compressor Kaleta - 250 l/min
Water pump - 230 V
Voltage - 230 V 50 Hz
*Output and supply distance depends on the plastering mix and pump used D.
Cooperates with a silo.
Possibility of spreading the unit into four basic modules: column with pump motoreducer; hopper; frame with electrical, air and water systems:
Agregat tynkarski przeznaczony do tynków maszynowych (wapienno-cementowe, wapienno-gipsowe, gipsowe, specjalne oraz wylewki samopoziomujące).
WYPOSAŻENIE
Pistolet natryskowy 1 szt.
Wąż tłoczny zaprawy 1×10 m
Wąż powietrzny 1×10 m
Pompa ślimakowa D6-3 FIT 1 szt.
Mieszak 1 szt.
Czyszczak z łącznikiem 1 szt.
Klucz do ślimaka 1 szt.
Dysza pistoletu 3 szt.
Klucz płaski 1 szt.
Czyszczak pistoletu 1 szt.
Piłeczka czyszcząca 1 szt.
Złączka g/k 2 szt.
DTR 1 szt.
Charakterystyka techniczna
Długość - 960 mm
Szerokość - 670 mm
Wysokość - 1580 mm
Wysokość zasypu - 960 mm
Waga - 250 kg
Pojemność kosza - 100 kg
*Max wydajność - 25 l/min
Max ciś. tłoczenia - 30 atm
*odległość podawania do - 20 m
Silnik pompy - 4 kW / 230 V
Silnik kosza - 1,1 kW / 230 V
Kompresor Kaleta - 250 l/min
Pompa wodna - 230 V
Napięcie - 230 V 50 Hz
*wydajność i odległość podawania zależna od mieszanki tynkarskiej i typu pompy: D.
Współpracuje z silosem.
Możliwość rozłożenia agregatu na cztery zasadnicze moduły: kolumna z motoreduktorem pompy; kosz zasypowy; rama z układem elektrycznym, powietrznym i wodnym: