Keyence Fotoelektrische Sensor mit eingebautem Messverstärker PZ-G101P for industrial robot

If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts

Fotoelektrische Sensor mit eingebautem Messverstärker
Rechteckige reflektierende Kabelausführung
PNP
Modell
PZ-G101P
Typ
Diffus-reflektierend
Engsicht reflektierend
Ausführung
Rechteckig
Ausgangsstrahlung
PNP
Kabelverbindung
Kabel (2 m) *1
Messabstand
200 mm
Lichtpunktdurchmesser
Ca. 5 mm DM (Bei einem Erkennungsabstand von 100 mm)
Lichtquelle
Rote LED
Empfindlichkeitseinstellung
Trimmer mit 1 Umdrehung (230°)
Ansprechzeit
500 µs
Betriebsart
Hell-EIN/Dunkel-EIN-Umschalter
Anzeigen (LED)
Ausgang: Orange LED
Stabiler Betrieb: Grüne LED
Steuerausgang
Offener Kollektor-Ausgang
max. 30 V
max. 100 mA
Restspannung: max. 1 V
Schutzschaltung
Verpolungsschutz
Überstromschutz
Spannungsfilter
Interferenzunterdrückung
Bis zu 2 Einheiten
(mit automatischer Frequenzumschaltfunktion)
Anzugsmoment
Rechteckige Modelle (Bereich Montagebohrung): max. 0,5 Nm
Nennwerte
Versorgungsspannung
10 bis 30 VDC
inkl. Restwelligkeit (S-S) 10 %
Stromaufnahme
34 mA oder weniger
Umgebungsbeständigkeit
Schutzart
IEC: IP67/NEMA: 4A
6
12/DIN: IP69K
Umgebungslicht
Glühlampe: max. 5,000 Lux
Sonnenlicht: max. 20,000 Lux
Umgebungstemperatur
20 bis +55 °C (Kein Gefrieren)
Relative Luftfeuchtigkeit
35 bis 85 % RH (Keine Kondensation)
Vibrationsfestigkeit
10 bis 55 Hz
Doppelamplitude 1,5 mm
2 Stunden jeweils in X
Y- und Z-Richtung
Stoßfestigkeit
1,000 m/s2
6 mal jeweils in X
Y- und Z-Richtung
Material
Gehäuse
M18-Mutter (nur Gewindemodelle)
Glasfaserverstärktes PBT
Linsenabdeckung
Polyarylat (PAR)
Trimmer
Glasfaserverstärktes Polyamid (PA)
Kabel (nur Kabelmodelle)
Polyvinylchlorid (PVC)
Stecker (nur Steckerausführung mit Kabel)
Zubehör
Betriebsanleitung
Gewicht
Rechteckige Kabelmodelle: Circa 60 g
Einsatzbereiche
Diese Informationen werden zeitnah ergänzt
Lieferumfang
Diese Informationen werden zeitnah ergänzt