New Geka Semipaxy 1000x400 mm B+R 15" turret punch press
≈ KES 3,629,000
Wiener Neudorf7421 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+43 2236 6...
Show
+43 2236 638700
+43 2236 ...
Show
+43 2236 63662
Austria 
Austria, Wiener Neudorf
Austria, Wiener Neudorf
Austria, Wiener Neudorf
Austria, Wiener Neudorf
Austria, Wiener Neudorf
Austria, Wiener Neudorf
ca. 10 Wochen ab Auftrags
Spanien
24100
494.05
1000 mm
400 mm
12 m/min
0,2 mm
0,1 mm
300 kg
The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat.
THE ASSEMBLY CONSISTS OF:
* Mounting plate.
* Table assembly with X and Y axis driven by servo motors.
* B+amp;R Power Panel 500 PC based 15 touch screen control
* Each axis X and Y has servo motors with built encoder for precise measurement.
* Electric cabinet
THE WORK PROCESS IS AS FOLLOWS:
* The position of the holes to be punched is programmed either in absolute or incremental dimensions.
* When the control is started up, the guide stops are positioned for first hole.
* The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles.
* After the punch has returned to the pre-set clearance height, the table guide stops move to the next programmed position.
* Repeat this sequence until all holes are punched.
B+amp;R PC BASED 15 TOUCH SCREEN CONTROL MAIN FEATURES:
*
* B+amp;R Power Panel 500
* Integrated keyboard
* Windows embedded operating system
* 15 colour touch screen WXGA resolution
* Compact Flash Memory.
* USB front port
* Ethernet port
* Easy and user friendly interface
* Programming is made through Line Pro software developed by Geka
* Importing of dxf/dstv files
* Network connectivity
* Remote assistance via the internet
* Run, design, jog, configuration and alarm modes
ELECTRIC CABINET
* Electric cabinet containing power and control equipment for the axis positioning and control of the machine
* Includes Allen-Bradley Guarmaster® safety relays
* Electric cabinet is mounted inside Hydracrops or Pumas frame. If machine is retrofitted, the electric cabinet is mounted out of the machines frame.
* Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know
LINE PRO MAIN FEATURES:
* It is a visual and a very easy to use application with graphic representations.
* It shows the operator the image of the piece that is being designed.
* All the process of the part (from designing to manufacturing) can be done and controlled directly from the Positioning Control.
* Importing of dxf and dstv files available according to designing
specifications of the software.
* It is easier to make changes on holes that have been already designed and the operator can easily identify any mistake on the part; as he is watching physically on the screen all the steps of the process of manufacturing of the part.
* Line Pro can be installed in a PC for later on sending the file via the network
or with a USB stick to the machine
*
Other X- and Y- ranges are also available, please ask for an offer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lieferzeit ca. 10 Wochen ab Auftrags
Ursprungsland Spanien
X-Achse 1000 mm
Y-Achse 400 mm
Positioniergeschwindigkeit 12 m/min
Positioniergenauigkeit 0,2 mm
Wiederholgenauigkeit 0,1 mm
Gewicht 300 kg