New Vogamakina Forced circulation electrical oven drying equipment
İSTANBUL/TUZLA8729 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 532 344...
Show
+90 532 344 49 50
+90 216 210...
Show
+90 216 210 13 11
Turkey 
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Turkey, İSTANBUL/TUZLA
Netherlands, Barneveld
Netherlands, Barneveld
Netherlands, Barneveld
Netherlands, Barneveld
Netherlands, Barneveld
Spain, Barcelona
Netherlands, Barneveld
Germany, Pullach
Slovakia, Kežmarok
Netherlands, Barneveld
Netherlands, Barneveld
Netherlands, Barneveld
Powder coating ovens are convection ovens which allows to electrostatic powder coated work pieces to be cured usually around at 200°C in 10 minutes
The ovens are designed according to the shape
quantity and weight of the product to be cured. Electricity
liquid or gas fuel is used for heating the furnace. Powder coating curing ovens are produced and named as box type
axial conveyorized and tunnel type oven depending on whether the products are driven into the oven manually
semi-automatically and automatically
Powder coating ovens are designed to work with the highest efficiency to achieve needed temperature with lowest energy use
Maximum temperatureMin.: 80 °C (176 °F)Max.: 300 °C (572 °F)200 °C (392 °F)
Пещите за прахово боядисване са конвекционни пещи, които позволяват електростатично прахово боядисаните детайли да се втвърдят обикновено при 200°C за 10 минути.
Пещите се проектират в зависимост от формата
количеството и теглото на продукта, който трябва да се втвърди. Електричество
за отопление на пещта се използва течно или газово гориво. Пещите за втвърдяване на прахови покрития се произвеждат и наричат кутиеобразен тип
аксиално конвейерна и тунелна в зависимост от това дали продуктите се вкарват в пещта ръчно
полуавтоматично и автоматично
Пещите за прахово боядисване са проектирани да работят с най-висока ефективност за постигане на необходимата температура при най-ниска консумация на енергия
Максимална температураМин.: 80 °C (176 °F)Макс.: 300 °C (572 °F)200 °C (392 °F)
Peči za prašno barvanje so konvekcijske peči, ki omogočajo, da se elektrostatično prašno premazani obdelovanci v 10 minutah strdijo pri 200 °C.
Peči so zasnovane glede na obliko
količini in teži izdelka, ki ga je treba strditi. Elektrika
za ogrevanje peči se uporablja tekoče ali plinasto gorivo. Peči za strjevanje prašnih premazov so izdelane in poimenovane kot škatlaste
peči z aksialnim transporterjem in tunelaste peči, odvisno od tega, ali se izdelki v peč dovažajo ročno
polavtomatsko ali avtomatsko
Peči za prašno barvanje so zasnovane tako, da delujejo z najvišjo učinkovitostjo za doseganje potrebne temperature ob najmanjši porabi energije.
Najvišja temperaturaMin.: 80 °C (176 °F)Max.: 300 °C (572 °F)200 °C (392 °F)
Pulverbeschichtungsöfen sind Konvektionsöfen, die es erlauben, elektrostatisch pulverbeschichtete Werkstücke in der Regel bei 200°C in 10 Minuten auszuhärten.
Die Öfen werden entsprechend der Form
Menge und Gewicht des zu härtenden Produkts ausgelegt. Elektrizität
Flüssig- oder Gasbrennstoff wird für die Beheizung des Ofens verwendet. Trocknungsöfen für Pulverbeschichtungen werden hergestellt und heißen Kastenofen
Axialförderer und Tunnelöfen, je nachdem, ob die Produkte manuell, halbautomatisch oder automatisch in den Ofen gefahren werden.
halbautomatisch und automatisch
Pulverbeschichtungsöfen sind so konzipiert, dass sie mit höchster Effizienz arbeiten, um die erforderliche Temperatur bei geringstem Energieverbrauch zu erreichen
HöchsttemperaturMin.: 80 °C (176 °F)Max.: 300 °C (572 °F)200 °C (392 °F)
Οι φούρνοι επικάλυψης πούδρας είναι φούρνοι συναγωγής που επιτρέπουν την ηλεκτροστατική σκλήρυνση των επικαλυμμένων με πούδρα τεμαχίων εργασίας συνήθως στους 200°C σε 10 λεπτά.
Οι κλίβανοι σχεδιάζονται ανάλογα με το σχήμα
ποσότητα και το βάρος του προϊόντος που πρόκειται να σκληρυνθεί. Ηλεκτρισμός
υγρό ή αέριο καύσιμο χρησιμοποιείται για τη θέρμανση του κλιβάνου. Οι φούρνοι σκλήρυνσης βαφής σε σκόνη παράγονται και ονομάζονται ως τύπου κιβωτίου
αξονικός μεταφερόμενος φούρνος και φούρνος τύπου σήραγγας ανάλογα με το αν τα προϊόντα οδηγούνται στο φούρνο χειροκίνητα
ημιαυτόματα και αυτόματα
Οι κλίβανοι βαφής σκόνης έχουν σχεδιαστεί για να λειτουργούν με την υψηλότερη δυνατή απόδοση ώστε να επιτυγχάνεται η απαιτούμενη θερμοκρασία με τη χαμηλότερη δυνατή κατανάλωση ενέργειας.
Μέγιστη θερμοκρασίαΕλάχιστη: 80 °C (176 °F)Μέγιστη: 300 °C (572 °F)200 °C (392 °F)
Les fours de poudrage sont des fours à convection qui permettent de durcir les pièces revêtues de poudre électrostatique, généralement à 200°C, en 10 minutes.
Les fours sont conçus en fonction de la forme
de la forme, de la quantité et du poids du produit à traiter. L'électricité
un combustible liquide ou gazeux est utilisé pour chauffer le four. Les fours de durcissement des revêtements en poudre sont fabriqués et nommés comme suit : fours de type boîte
à convoyeur axial et à tunnel, selon que les produits sont introduits dans le four manuellement, semi-automatiquement ou automatiquement.
semi-automatique ou automatique
Les fours de poudrage sont conçus pour fonctionner avec la plus grande efficacité afin d'atteindre la température requise tout en consommant le moins d'énergie possible.
Température maximaleMin. 80 °C (176 °F)Max. 300 °C (572 °F)200 °C (392 °F)
A porbevonó kemencék olyan konvekciós kemencék, amelyek lehetővé teszik az elektrosztatikus porbevonatú munkadarabok általában 200°C körüli hőmérsékleten történő szárítását 10 perc alatt.
A kemencéket az alaknak megfelelően tervezik
mennyiségének és súlyának megfelelően. Elektromosság
folyékony vagy gázüzemanyagot használnak a kemence fűtésére. A porbevonatot szárító kemencéket dobozos típusúakként gyártják és nevezik el.
axiálszállító és alagút típusú kemencék, attól függően, hogy a termékeket kézzel vezetik-e a kemencébe.
félautomatikusan vagy automatikusan
A porbevonó kemencéket úgy tervezték, hogy a lehető legnagyobb hatékonysággal működjenek a szükséges hőmérséklet eléréséhez a legalacsonyabb energiafelhasználás mellett.
Maximális hőmérsékletMin.: 80 °C (176 °F)Max.: 300 °C (572 °F)200 °C (392 °F)
Pulverlakkeringsovner er konveksjonsovner som gjør det mulig å herde elektrostatisk pulverlakkerte arbeidsstykker ved ca. 200 °C på 10 minutter.
Ovnene utformes i henhold til form, mengde og vekt
form, mengde og vekt på produktet som skal herdes. Elektrisitet
flytende drivstoff eller gass brukes til oppvarming av ovnen. Ovner for herding av pulverlakk produseres og navngis som boks-type
aksialtransportør og tunnelovn, avhengig av om produktene kjøres inn i ovnen manuelt, halvautomatisk eller automatisk.
halvautomatisk eller automatisk
Pulverlakkeringsovner er konstruert for å arbeide med høyest mulig effektivitet for å oppnå ønsket temperatur med lavest mulig energiforbruk.
Maksimal temperaturMin: 80 °C (176 °F)Maks: 300 °C (572 °F)200 °C (392 °F)
Cuptoarele de acoperire cu pulbere sunt cuptoare cu convecție care permit ca piesele de lucru acoperite cu pulbere electrostatică să fie întărite, de obicei, la aproximativ 200°C în 10 minute.
Cuptoarele sunt proiectate în funcție de formă
cantitatea și greutatea produsului care urmează să fie polimerizat. Electricitate
combustibil lichid sau gazos este utilizat pentru încălzirea cuptorului. Cuptoarele de întărire a acoperirii cu pulbere sunt produse și denumite ca fiind de tip cutie
cuptor cu transport axial și cuptor de tip tunel, în funcție de faptul dacă produsele sunt introduse în cuptor manual
semiautomat și automat
Cuptoarele pentru acoperirea cu pulbere sunt proiectate să funcționeze cu cea mai mare eficiență pentru a atinge temperatura necesară cu un consum de energie cât mai mic
Temperatura maximăMin. 80 °C (176 °F)Max. 300 °C (572 °F)200 °C (392 °F)
Peči za prašno barvanje so konvekcijske peči, ki omogočajo, da se elektrostatično prašno premazani obdelovanci v 10 minutah strdijo pri 200 °C.
Peči so zasnovane glede na obliko
količini in teži izdelka, ki ga je treba strditi. Elektrika
za ogrevanje peči se uporablja tekoče ali plinasto gorivo. Peči za strjevanje prašnih premazov so izdelane in poimenovane kot škatlaste
peči z aksialnim transporterjem in tunelaste peči, odvisno od tega, ali se izdelki v peč dovažajo ročno
polavtomatsko ali avtomatsko
Peči za prašno barvanje so zasnovane tako, da delujejo z najvišjo učinkovitostjo za doseganje potrebne temperature ob najmanjši porabi energije.
Najvišja temperaturaMin.: 80 °C (176 °F)Max.: 300 °C (572 °F)200 °C (392 °F)