Amada EML Z 3510 NT 4kW laser cutting machine
Ludwigsburg6926 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7141 48...
Show
+49 7141 4882799
+49 176 246...
Show
+49 176 24697022
Germany 
Germany, Lübeck
Germany, Location:munich
Germany, Pullach
€4,000
≈ KES 597,800
≈ $4,622
Germany, Velbert
Germany, Alemania
Germany, Alemania
Germany, Freiberg am Neckar
Germany, Ludwigsburg
Germany, Lübeck
Germany, Lübeck
Germany, Freiberg am Neckar
Germany, Pullach
Spain, Barcelona
Spain, España
Spain, Barcelona
Germany, Lübeck
Germany, Alemania
Germany, Pullach
Germany, Pullach
Germany, Pullach
Laser cutting machine parts
Year: 2008 – Installation 2010
Machine hours: about 51.000h/ 20.000h / 9.000h
Technical data:
Control: AMNC-F
Punch force: 300kN
Working area punch operation (XxY): 3050 x 1620 mm
Working area laser operation (XxY): 2550 x 1270 mm
Working area combined operation (XxY): 2500 x 1250 mm
Working area laser axis (Z): 380 mm
Max. material thickness: 6 mm
Max. table loading weight: 150 kg
Feed rate X/Y: 100 / 80 m/min
Simultaneous: 128 m/min
Positioning tolerance : +/- 0,1 mm
Number of stations in turret: 45
Thereof rotating stations: 4
Feed rate turret: 30 1/min
Max. number of hits: 780/min
Type of tables: brush tables
Part flap: 400 x 1270 mm
Machine frame: Bridge frame
Punching drive: servo-electric
Drives turret + table: AC servo motors
Machine weight: 27 to
Laser:
Resonator: FANUC AF 4000 E
Max. continuous laser power: 4000 W
Laser gas consumption: 10 l/h
System principle: half-flying optics
Laser wave length: 10,6 µm
Beam divergence: < 2mrad
Control:
CNC type: AMNC-F
Screen: 14“ LCD
Number of controlled axis: 7 (X/YP/YL/Z/T/C)
Memory capacity: 10 MB Flash ROM
Data mediums: 3,5“ HD, CD-ROM
Interfaces: USB, RS 232, Ethernet
Equipment:
- Part flap 400 x 1270mm
- Air Jet Vacuum
- Barcode reader
- Wedge leveling elements
- Sheet tilt up monitoring
- „Punch and forming“
- 4 times tapping unit
- Lifting brush table
- Nozzle and lense quick changing system
- Automatic focal system
- Automatic gas pressure adjustment
- High pressure cutting device (CleanCut)
- Aluminum cutting device (AluCut)
- Dust collector
- Chiller unit
Baujahr: 2008 – IB 2010
Maschinenstunden: ca. 51.000h/ 20.000h / 9.000h
Technische Daten:
Steuerung: AMNC-F
Stanzkraft: 300kN
Verfahrbereich Stanzbetrieb (XxY): 3050 x 1620 mm
Verfahrbereich Laserbetrieb (XxY): 2550 x 1270 mm
Verfahrbereich kombinierter Betrieb (XxY): 2500 x 1250 mm
Verfahrbereich Laserachse (Z): 380 mm
Max. Materialdicke: 6 mm
Max. Tischbelastung: 150 kg
Verfahrgeschwindigkeit X/Y: 100 / 80 m/min
Achssimultan: 128 m/min
Positionsabweichung: +/- 0,1 mm
Anzahl Stationen Revolver: 45
Davon Rotationsstationen: 4
Revolverdrehgeschwindigkeit: 30 1/min
Max. Anzahl Stanzhübe: 780/min
Tischausführung: Bürstentisch
Teileklappe: 400 x 1270 mm
Maschinenrahmen: Brückengestell
Pressenantrieb: servo-elektrisch
Antriebe Revolver + Tischantrieb: AC-Servo Motoren
Maschinengewicht: 27 to
Laser:
Resonator: FANUC AF 4000 E
Max. Laserdauerleistung: 4000 W
Lasergasverbrauch: 10 l/h
Systemprinzip: halbfliegende Optik
Laserwellenlänge: 10,6 µm
Strahldivergenz: < 2mrad
Steuerung:
CNC-Typ: AMNC-F
Bildschirm: 14“ LCD
Anzahl der kontrollierten Achsen: 7 (X/YP/YL/Z/T/C)
Speicherkapazität: 10 MB Flash ROM
Datenträgerlaufwerk: 3,5“ HD, CD-ROM
Schnittstellen: USB, RS 232, Ethernet
Ausstattung:
- Teileklappe 400 x 1270mm
- Air Jet Vakuum
- Barcode Leser
- Keilnivellierelemente
- Blechdeformationssensorik
- „Punch- und Forming“
- integrierte 4-fach Gewindeeinheit
- Hubbürstentisch
- Düsen- und Linsenschnellwechselsystem
- Automatisches Fokussystem
- Automatische Gasdruckregelung
- Hochdruckschneideinrichtung (CleanCut)
- Aluminiumschneideinrichtung (AluCut)
- Absauganlage
- Kühlaggregat