New TyreON T700S truck tyrechanger 42 Inch - power 2.2kW+2.2kW truck tire changer
≈ KES 684,800
Akersloot6460 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 537...
Show
+31 6 53701658
+31 72 540...
Show
+31 72 540 1002
Netherlands 
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Netherlands, Akersloot
Rims 14 - 42 Inch
Wheels up to 1600 kg - Ø 230 cm - 105 cm ↔
Mounting speed 1-speed | 5 rpm
Bead breaker force 3300 kg / 32.360 kN
Operation Electric-hydraulic
Gear motor-chuck 2.2 kW
Hydraulic pump 2.2 kW
Optional 56 Inch extensions
In wooden box L215 x W185 x H105 cm - 820 kg
Voltage 400V (no compressed air required)
230V/1Ph - available on order (25A)
Including Free accessoires
Heavy duty truck tyrechanger for tube and tubeless tyres and rims of
Construction- and earth moving equipment
Agricultural tractors, vehicles and machines
Trucks, tractor units and trailers
City buses, coaches and commercial vehicles
The mounting arm can be moved horizontally with the hydraulic sliding carriage. With check valve, all hydraulic movements are equal and can be used to their full power potential.
TyreON T700S - delivered ready for operation
Reliable and powerful truck tire changer
CE certified and 1 year warranty on all parts
Compiled with Bucher Hydraulics - market leader in innovative drive technology
Filled with hydraulic oil and fully tested before it is packed
Comes with accessories to change truck tires directly
Solid construction, completely finished with powder coating
Strong clamping and bead breaking force, controlled by joystick
Ready for use upon receipt, easy to install
With a central lifting eye and floor anchoring holes
With main switch, cord and power plug - no compressed air required!
Optional: set of 4 chuck extensions - 56 Inch
Constant operating pressure - optimum performance
The allround TyreON T700S is equipped with a non-return valve in the middle of its hydraulic system. This valve ensures a constant operating pressure, all hydraulic movements are equal and can be used to their full power potential. The pressure on the hydraulic pump is reduced which benefits the technical life cycle.
Reliable - no wear and scratches on the rim
The TyreON T700S is a tyre machine for intensive use and comes with a powerful mounting arm which is assembled with a mounting disc and a hinged hook resistant to heavy loads.
A plastic strip in a recess in the hook prevents wear and scratches on the (alloy) rim.
The hinged parts are fitted with grease nipples, by lubricating them the truck tyrechanger will work smoothly and wear and tear is prevented.
Operation - joystick - hydraulic sliding carriage
The controller allows you to perform 8 movements. After rolling the wheel onto the ramp, the tire changer carries out the heavy part of the work.
Handy 24V ergonomic control unit with emergency stop, joystick and foot pedal
Powerful electric motor for clockwise and anticlockwise rotation of the chuck
Top quality 2.2 kW hydraulic aluminum gear pump by Bucher Hydraulics
With a hydraulic ramp to move the wheel to and from the chuck
Chuck with 4 hydraulic clamping arms of hardened steel for clamping and lifting the wheel
The mounting arm can be locked manually in 2 positions on the sliding carriage and moves horizontally by the hydraulic sliding carriage in both directions
The mounting head with disc and hook is rotated by hand and locks itself
Truck mounting accessories available
The techniques and possibilities of the TyreON T700S
Technical details T700S (400V)
For rims with size 14 - 42 Inch A
Maximum wheel diameter 230 cm D
Maximum width of the wheel 105 cm C
Maximum wheel weight 1600 kg
Clamping range (chuck) 11 - 114 cm (43 Inch)
Bead breaker force 3300 kg / 32.360 kN F
Operating pressure - hydraulic 200 Bar
Performance hydraulic pump motor 2.2 kW F
Performance gear motor - electric rotation of the chuck 2.2 kW E
Mounting speed - rotation of the chuck - clockwise and anticlockwise 1 speed
Rotations per minute of the chuck 5 rpm
Number of automated movements by controller 8 movements
Operating voltage of the controller 24 Volt (DC)
Number of positions of the mounting arm on the sliding carriage 2 positions
Weight 820 kg
Noise level 55 - 70 dBA
Rotating chuck with 4 self centering clamping arms ✓
Non return valve - continuous oil-pressure ✓
Grease nipples ✓
Second gear for high speed of all hydraulic movements (2nd foot pedal) -
Voltage 400V - 3Ph
Fuse C16A
Footprint (length x width) 190 x 174 cm
Delivery
All functions of the TyreON T700S are tested carefully before the machine is packed in a sturdy wooden box with:
The wired portable control unit
A grease gun and lubricant for the silding carriage etc.
A set of plastic strips intended for in the mounting hook
2 tire levers, a tyresoap brush and a bucket tyresoap
The installation and operating manual
Hydraulic oil (hv-iso-32 is included)
TyreON TRC ST rim clamp for trucks, agricultural and contsruction equipment
T700S truck tyrechanger 42 Inch - power 2.2kW+2.2kW